启动star.php的时候报错

daddycaccy

以debug(调试)方式启动会报错
Warning: stream_socket_server(): unable to connect to tcp://xxxxxxxxx:2903 (Cannot assign requested address)
不知道是哪里的配置没对应上,服务器的安全组已经加上了这端口了的

1593 2 0
2个回答

walkor

监听的IP不属于本机。本机拥有哪些IP用 ifconfig命令查看

daddycaccy

[root@hecs-x-large-2-linux-20210330100122 GatewayWorker]# ifconfig
docker0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 172.17.0.1 netmask 255.255.0.0 broadcast 0.0.0.0
ether 02:42:25:d9:4f:40 txqueuelen 0 (Ethernet)
RX packets 812119 bytes 1563367274 (1.4 GiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 674506 bytes 205203633 (195.6 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.0.154 netmask 255.255.255.0 broadcast 192.168.0.255
ether fa:16:3e:e3:f4:09 txqueuelen 1000 (Ethernet)
RX packets 8794694 bytes 5843409276 (5.4 GiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 9111807 bytes 3253656652 (3.0 GiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
loop txqueuelen 1000 (Local Loopback)
RX packets 5995178 bytes 2567933836 (2.3 GiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 5995178 bytes 2567933836 (2.3 GiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

veth6640ac8: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
ether a6:ed:e6:91:f7:c8 txqueuelen 0 (Ethernet)
RX packets 39 bytes 28999 (28.3 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 45 bytes 17302 (16.8 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

  • walkor 2021-04-24

    说明外网ip不属于本机,所以监听不了。你这个外网ip应该只是一个类似代理设备,云服务器一般都这样。

年代过于久远,无法发表回答
🔝